manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 165

 

KRONE ISOBUS Terminal - unloading operation

 

165 

 

Pos: 129.54.52 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Grundbild Entladebetrieb/Entladebetrieb Kratzbodenrücklauf einschalten @ 266\mod_1400654585992_78.docx @ 2019400 @ 3 @ 1 

 

12.1.14 

Switching on the floor conveyor reverse  

Depending on the features of the machine 

• 

To switch on the floor conveyor reverse, press 

 and hold down. 

The floor conveyor runs for as long as the softkey is pressed. 

Pos: 129.54.53 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Grundbild Entladebetrieb/Entladebetrieb Eilgang @ 266\mod_1400565428098_78.docx @ 2015708 @ 3 @ 1 

 

12.1.15 

Switching on rapid traverse  

CC000415_1

B

Fig. 104 

The 

 softkey (switching on rapid traverse) is not available until the floor conveyor supply has 

been switched on. 
 

Switching on rapid traverse 

– 

As a pre-condition, the floor conveyor supply has been switched on. 

• 

To switch on the rapid traverse, press 

 . 

 
The symbol and the arrow (B) indicate that the function is being run. The floor conveyor 
operates at maximum supply speed. 
 

Switching off rapid traverse 

•  To switch off the rapid traverse, press 

 .  

 
The floor conveyor stops, the symbol and the arrow (B) are no longer displayed. 

Pos: 129.54.54 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands