Home
/
Krone
/
AX 250 D
/
Original Operating Instruction

Krone AX 250 D, Original Operating Instruction

Share

Page: 178 / 398

Krone AX 250 D Original Operating Instruction Download Page 178

KRONE ISOBUS Terminal - Menus

178

Pos: 129.71.15 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Hauptmenüs/Hauptmenü 1 2014/Hauptmenü 1 Ladeautomatik Power Load /Ladeautomatik Power Load Bild @ 263\mod_1399987305529_78.docx @ 2004582 @ @ 1

CC000480_4

1

1

1-1

3/3

43°

Fig. 110

Pos: 129.71.16 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Hauptmenüs/Hauptmenü 1 2014/Hauptmenü 1 Ladeautomatik Power Load /Untermenü 1-1 Modus für Power Load: Kraftsensor nullen im Modus Power Load @ 263\mod_1399987900338_78.docx @ 2004669 @ @ 1

Zeroise force sensor

Zeroising of the force sensor is required if a force is displayed on the basic screen when the
front wall is not loaded. The reset must only be performed when there is no load on the front
wall.
If the line (1) shows a force (greater than +5 or less than -5) while the machine is in an unloaded
state, the force sensor must be "zeroised".

•

To zeroise the force sensor, press

.

Pos: 129.71.17 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Hauptmenüs/Hauptmenü 1 2014/Modus aufrufen speichern @ 263\mod_1399988240202_78.docx @ 2004698 @ @ 1

Calling and saving a mode

The

icon in the upper line indicates that the displayed mode is saved.

•

To open the next mode, press

.

•

To open the previous mode, press

.

The

symbol in the upper line disappears.

•

To save, press

.

The set mode is saved and the

symbol appears in the upper line.

•

To leave the menu, press

.

Pos: 129.71.18 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Hauptmenüs/Hauptmenü 1 2014/Hauptmenü 1 Ladeautomatik Power Load Beschreibung Ladeposition der Vorderwand ändern @ 263\mod_1399987450340_78.docx @ 2004640 @ @ 1

Changing loading position for front wall

•

Until the front wall has reached the new loading position and the

graphic is displayed,

press

or

.

•

To save the loading position, press

.

Pos: 129.72 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
176
177
178
179
180
...
»

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands