manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 317

 

Maintenance

 

317 

 

Pos: 164.1 /Überschriften/Überschriften 2/P-T/Reifen @ 0\mod_1197357995667_78.docx @ 18075 @ 2 @ 1 

 

17.12 Tyres 

 

Pos: 164.2 /BA/Sicherheit/7. Gefahrenhinweise alt/Warnung - Falsche Reifenmontage @ 0\mod_1197358162433_78.docx @ 18132 @  @ 1 

 

 

Warning! - Tyre fitting incorrect 

Effect: Injuries or damage to the machine 
• 

Fitting tyres requires sufficient knowledge and the availability of proper tools! 

• 

If tyres are not correctly fitted, it could explode when pumped up. This can cause serious 
injury. If you do not have sufficient experience of fitting tyres, have tyres fitted by the 
KRONE dealer or a qualified tyre specialist. 

• 

When fitting tyres on the wheel rims, the maximum pressure given by the tyre manufacturer 
must not be exceeded. The tyre or even the wheel rim could explode and/or burst. 

• 

If the tyre heels do not fit properly when the maximum permitted pressure is reached, let 
out the air, align tyres, lubricate the tyre heels and pump up the tyre again. 

• 

Detailed information about how to fit tyres onto agricultural machinery can be obtained from 
the tyre manufacturers. 

 

Pos: 164.3 /BA/Wartung/Reifen/Anziehdrehmoment @ 0\mod_1199955905460_78.docx @ 37340 @  @ 1 

 

Tightening Torque 

Threading 

Key size in 

mm 

Number of bolts 
per hub - pieces 

Max. tightening torque 

  

 

black 

galvan. 

M12 x 1.5 

19 

4/5 

95 Nm 

95 Nm 

M14 x 1.5 

22 

5 

125 Nm 

125 Nm 

M18 x 1.5 

24 

6 

290 Nm 

320 Nm 

M20 x 1.5 

27 

8 

380 Nm 

420 Nm 

M20 x 1,5 

30 

8 

380 Nm 

420 Nm 

M22 x 1.5 

32 

8/10 

510 Nm 

560 Nm 

M22 x 2 

32 

10 

460 Nm 

505 Nm 

 

Pos: 164.4 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands