manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 343

 

Maintenance - Brake System

 

343 

 

Pos: 204.8 /Überschriften/Überschriften 2/U-Z/Übertragungseinrichtung einstellen @ 275\mod_1404391929258_78.docx @ 2067590 @ 2 @ 1 

 

20.2 

Adjusting the transfer mechanism 

Pos: 204.9 /BA/Wartung/Druckluftbehälter/Erhöhte Unfallgefahr bei ungenügenden technische Kenntnisse für Einstell- und Reparaturarbeiten. @ 275\mod_1404380923105_78.docx @ 2066856 @  @ 1 

 

 

WARNING! 

Insufficient technical knowledge to carry out adjustment and repair work poses an increased 
risk of injury. 
Insufficient knowledge of the brake system may impair the operational safety of the machine 
and cause accidents. As a result, people may be seriously injured or killed. 
• 

Adjustment and repair work on the brake system must only be performed by authorised 
professional workshops. 

 

Pos: 204.10 /BA/Wartung/Bremsanlage/Gestängesteller_Ladewagen @ 288\mod_1409839322537_78.docx @ 2277166 @  @ 1 

 

TRD00071

Fig. 218 

Pos: 204.11 /BA/Wartung/Bremsanlage/Übertragungseinrichtung einstellen @ 275\mod_1404392540031_78.docx @ 2067618 @  @ 1 

 

After the first few kilometres of driving, the transfer mechanisms and the brake linings of the 
brake drum will have adjusted. The play resulting from this must be compensated for. 

Pos: 204.12 /BA/Wartung/Druckluftbehälter/Die Einstellung darf nur von autorisierten Fachwerkstätten durchgeführt werden. @ 275\mod_1404391090294_78.docx @ 2067562 @  @ 1 

 

The setting may only be performed by authorised professional workshops. 

Pos: 204.13 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands