manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 189

 

KRONE ISOBUS Terminal - Menus

 

189 

• 

Activate the tractor hydraulics. 

• 

Increase the engine speed of the tractor to nominal speed. 

• 

To activate the floor conveyor, press 

 . 

• 

Until the floor conveyor speed is noticeably reduced, press 

 . 

The bar diagram display is reduced. 

• 

Until the floor conveyor speed stops increasing, press 

 . 

• 

To save the value, press 

 . 

The 

 icon in the top line appears. 

• 

To deactivate the floor conveyor, press 

 . 

 

Pos: 129.84 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands