manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 86

Start-up

 

 

86 

 

Pos: 121.18 /Überschriften/Überschriften 3/F-J/Hydraulikleitungen anschließen @ 0\mod_1199777037794_78.docx @ 34244 @ 3 @ 1 

 

7.3.1 

Connecting the hydraulic lines  

Pos: 121.19 /BA/Maschinenbeschreibung/BiG PAck/Handlungsanweisung: Hydrauliksysteme Traktor-Maschine drucklos  / Maschine stillsetzen und sichern @ 274\mod_1404364138167_78.docx @ 2065053 @  @ 1 

 

• 

Switch the control units on the tractor to float position. 

• 

Depressurise the hydraulic system on the tractor and the machine. 

• 

Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting 
down and safeguarding the machine". 

 

Pos: 121.20 /BA/Inbetriebnahme/EasyCut/Hydraulik/Hydraulikanschluss Bild EC B 1000 @ 97\mod_1329400010401_78.docx @ 878667 @  @ 1 

 

Fig. 41 

Pos: 121.21 /BA/Inbetriebnahme/Ladewagen/Hydraulik/Hydraulikschläuche ankuppeln Traktor mit Konstant-Strompumpe @ 239\mod_1395068243643_78.docx @ 1886494 @  @ 1 

 

Tractor with constant flow pump: 

• 

Connect the pressure line (red P) to a single-action control unit on the tractor, nominal 
width 20 / plug size 4. 

• 

Connect the return-flow line (blue T) to the unpressurised return flow on the tractor, nominal 
width 25/sleeve size 4. 

 

Pos: 121.22 /Abkürzungen /Abkürzungen Beschreibung/oder @ 102\mod_1331035559661_78.docx @ 902093 @  @ 1 

 

or 

Pos: 121.23 /BA/Inbetriebnahme/Ladewagen/Hydraulik/Hydraulikschläuche ankuppeln Traktor mit Load-Sensing Pumpe und Meldeleitung (LS) @ 239\mod_1395068775481_78.docx @ 1886765 @  @ 1 

 

Tractor with load-sensing pump and signal line (LS):

 

• 

Connect the pressure line (red P) to the Load Sensing connection on the tractor, nominal 
width 20/plug size 4. 

• 

Connect the return-flow line (blue T) to the unpressurised return flow on the tractor, nominal 
width 25/sleeve size 4. 

• 

Connect the signal line (green LS) to the connection for the Load Sensing control, nominal 
width 12/plug size 2. 

Pos: 121.24 /Abkürzungen /Abkürzungen Beschreibung/oder @ 102\mod_1331035559661_78.docx @ 902093 @  @ 1 

 

or 

Pos: 121.25 /BA/Inbetriebnahme/Ladewagen/Hydraulik/Hydraulikschläuche ankuppeln Traktor mit Konstant-Druckpumpe @ 239\mod_1395069027653_78.docx @ 1886884 @  @ 1 

 

Tractor with constant pressure pump: 

• 

Connect the pressure line (red P) to a single-action control unit on the tractor, nominal 
width 20 / plug size 4. 

• 

Connect the return-flow line (blue T) to the unpressurised return flow on the tractor, nominal 
width 25/sleeve size 4. 

• 

Place the signal line (green  LS) into the retainer on the machine. 

 

Pos: 121.26 /BA/Inbetriebnahme/Ladewagen/Hydraulik/Zusätzlich ein einfachwirkendes Steuergerät für Faltgatter @ 121\mod_1343888163222_78.docx @ 1109168 @  @ 1 

 

Additional For (AX 250 L /AX 280 L/ AX 250 D): 

A single-acting control unit: lifts or lowers the folding grid (plug size 3) 
 

Pos: 121.27 /Überschriften/Überschriften 2/F-J/Hydraulische Bremse (Export) @ 17\mod_1236332990291_78.docx @ 204927 @ 2 @ 1 

 

7.4 

Hydraulic brake (Export)  

Pos: 121.28 /BA/Sicherheit/8. Voraussetzungen/Handlungsanweisung für alle Maschinen/Handlungsanweisung: Maschine stillsetzen und sichern @ 274\mod_1404365253849_78.docx @ 2065151 @  @ 1 

 

• 

Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting 
down and safeguarding the machine". 

Pos: 121.29 /BA/Inbetriebnahme/Hydraulische Bremse/Hydraulische Bremse (Export) @ 17\mod_1236333662166_78.docx @ 204952 @  @ 1 

 

A hydraulic brake is provided for certain export versions. In this version, the corresponding 
hydraulic hose is connected with the control valve on the tractor side. The brake is activated by 
actuating the tractor brake pedal. 

Pos: 121.30 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands