Krone AX 250 D Original Operating Instruction Download Page 315

Page: 315 / 398

Maintenance

315

Pos: 162.36 /BA/Wartung/Ladewagen/Abstand Abstreifer-Trommel @ 188\mod_1380615537009_78.docx @ 1616016 @ 2 @ 1

17.10

Distance from Scraper to Drum

Fig. 198
The scrapers (2) must be at a distance of " A=20 - 25 mm " from the rotating conveyor drum
(3).

Setting distance between scraper and drum

•

Disconnect all screw couplings (1) from the scraper bar on right and left

•

Loosen the screw coupling (4) on the wedge plate (5) (right and left sides).

•

Using the wedge plate (5), turn the entire scraper bar until dimension A=20 - 25 mm is
reached.

•

Tighten screw couplings (1) and (4).

Pos: 162.37 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Summary of Contents for AX 250 D















































































































































































































































































































































































































Search results

Summary of Contents for AX 250 D

Reviews:

Brands by name

Popular brands

Krone AX 250 D, Original Operating Instruction

Search results

Summary of Contents for AX 250 D

Reviews:

Brands by name

Popular brands