Maintenance
320
Pos: 169 /BA/Einstellungen/Ladewagen/Schneidwerk/Wartung - Messer schleifen AX_MX_ZX @ 0\mod_1199876628846_78.docx @ 36585 @ 3 @ 1
17.14.1 Grinding
blades
Warning! - Grinding blades
Effect: Severe injuries to the eyes
•
Always wear safety gloves and goggles when grinding the blades
KRS-1-062
Figure 203
Check the sharpness of the blades (2) daily. If necessary, grind the blades after they have been
removed on the back of the cutting edge (1). Grind only the ungrooved side. When grinding,
make certain no notches are made in the area (3).
Note
•
Less force is required during loading when the cutting blades are sharp (this in turn lowers
fuel consumption.
•
If at all possible, use the KRONE grinding mechanism for grinding. The Part No. for the
blade holder for the KRONE blade grinding tool is 940 003-0.
•
Avoid allowing the blades to heat up too much when grinding them. The cutting blades are
too hot if you can see discolouration in them. Excessive heat reduces the service life of the
cutting blades
.
•
The blades (2) must be checked before installation in area (3) (contact point to the stop bar)
for accumulations and thoroughly cleaned if necessary. Otherwise it may no longer be
possible to swivel the blade bar in completely.
Pos: 170 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
