manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 312

Maintenance

 

 

312 

 

Pos: 162.27 /BA/Wartung/Ladewagen/Kratzbodenkette kürzen @ 0\mod_1200034449903_78.docx @ 38848 @ 3 @ 1 

 

17.6.1 

Shortening of the floor conveyor chain  

KDW05060

3

2

1

Figure 193 
• 

Remove the cotter pin (1) on the chain connecting link (3) 

• 

Remove the locking piece (2). 

• 

Shorten the chain by 2 or 4 links. 

• 

Connect the chain with the chain connecting link (3). 

• 

Secure the locking piece (2) and cotter pin (1). 

 

 

Note 

Both chains of the floor conveyor must be shortened by the same length. On the dual floor 
conveyor, the relevant chair pairs belonging together must be shortened.  

 
• 

Re-tension the tension spring (3) until the screw (5) can be pushed through again. 

• 

Remove the threaded spindle and screw from the bore (7). 

Pos: 162.28 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands