Krone AX 250 D Original Operating Instruction Download Page 21 | Manualshive

Page: 21 / 398

Krone AX 250 D Original Operating Instruction Download Page 21

Safety

21

Pos: 25.35 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenbereich Gelenkwelle @ 176\mod_1372945619081_78.docx @ 1508114 @ @ 1

Danger zone universal shaft

People may become caught by the universal shaft, pulled in and seriously injured.
•

Ensure that the universal shaft guards are attached and functional.

•

Ensure that nobody is in the danger zone of the PTO shaft or the universal shaft.

•

Provide the section tube and universal shaft guards with adequate cover.

•

Allow the universal shaft locks to engage.

•

Attach the chains to prevent the universal shaft guards from rotating with the shaft.

•

Follow the operating instructions for the universal shaft.

Pos: 25.36 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenbereich Nachlaufende Maschinenteile - Ladewagen @ 244\mod_1395750726433_78.docx @ 1906792 @ @ 1

Danger zone due to coasting machine parts

When the drives have been switched off, the following machine parts will coast:
– Universal

shaft

– Conveyor

drum

– Drive

belt

– Pick-up
– Discharge

rollers

When machine parts are coasting, people may be seriously injured or killed.
•

Do not touch machine parts until they have come to a standstill.

Pos: 25.37 /Überschriften/Überschriften 3/P-T/Schutzvorrichtungen funktionsfähig halten @ 187\mod_1380021062004_78.docx @ 1607105 @ 3 @ 1

4.3.10

Keeping safety devices functional

Pos: 25.38 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Schutzvorrichtungen funktionsfähig halten @ 176\mod_1373004721530_78.docx @ 1508355 @ @ 1

If safety devices are missing or damaged, people may be seriously injured or killed by moving
machine parts.
•

Replace damaged safety devices.

•

Re-install all removed safety devices and all other parts and move them into protective
position before starting up the machine.

•

If it is doubtful whether all safety devices have been correctly installed and are functional,
have a service centre check them.

Pos: 25.39 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
19
20
21
22
23
...
»

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands