manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 208

KRONE ISOBUS Terminal - Menus

 

 

208 

 

Pos: 129.130 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Hauptmenüs/Bis 2013/Hauptmenü 1 Einstellungen/Menü 1-9 Gewichtserfassung /Kalibrierung Kraftmeßbolzen Achse / Kraftmeßbolzen Deichsel @ 83\mod_1317204020223_78.docx @ 727895 @ 4 @ 1 

 

13.9.4.1 

Calibrating the force measuring bolt for supported load and axle load  

 

 

Note 

The individual weighing of supported load / axle load is only required if the drawbar force 
measuring bolt is not calibrated. 

 

Pos: 129.131 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Hauptmenüs/Bis 2013/Hauptmenü 1 Einstellungen/Menü 1-9 Gewichtserfassung /Kalibrierung Achslast und Stützlast Seite2 @ 268\mod_1401115286725_78.docx @ 2028928 @  @ 1 

 

Calibration procedure: 
• 

Weight registration menu in manual mode must be selected (see chapter "Setting weight 
registration"  

• 

Fill the loading wagon. 

F1

F2

F3

F4

F5

F6

F7

F8

F9

F10

F11

F11

F12

ESC

CC000401

1

CC000436_1

Fig. 128 

• 

Open the "Save full weight (

)

" menu from the start screen. 

• 

Save the displayed full weight (

). 

• 

Then drive to the weighing machine and determine the bearing load (1) (full weight) and 
axle load (2) (full weight). (Note down values for bearing load and axle load). 

• 

Completely unload the loading wagon. 

 

• 

Then drive to the weighing machine and determine the bearing load (1) 

(empty weight) and axle load (2) (empty weight) again. (Note down values for bearing load 
and axle load). 

• 

Determine and note down the difference value between the bearing load (1) (full weight) 
and bearing load (1) (empty weight). 

• 

Determine and note down the difference value between the axle load (2) (full weight) and 
axle load (2) (empty weight). 

F1

F2

F3

F4

F5

F6

F7

F8

F9

F10

F11

F11

F12

CC000441_1

CC000440_1

Fig. 129 

• 

Open the "Save empty weight (

)

" menu from the Unloading operation basic screen 

• 

Press the function key for 

  to enter the calibration menu. 

Pos: 129.132 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands