Krone AX 250 D Original Operating Instruction Download Page 106

Page: 106 / 398

KRONE operation terminal Alpha

106

Pos: 125.23 /BA/Info-Center/Ladewagen/Medium/Knickdeichsel heben/senken @ 141\mod_1355484887426_78.docx @ 1252987 @ 2 @ 1

9.8

Lifting / Lowering Offset Drawbar

Fig. 58

Lifting offset drawbar

•

Press the

key (8) and hold it down.

The offset drawbar lifts as long as key (8) is pressed.
The indicator lamp (8) lights up as long as key (8) is pressed.

Lowering offset drawbar

•

Press

key (7) and hold it down.

The offset drawbar lowers as long as key (7) is pressed.
The indicator lamp (7) lights up as long as key (7) is pressed.

Pos: 125.24 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Summary of Contents for AX 250 D















































































































































































































































































































































































































Search results

Summary of Contents for AX 250 D

Reviews:

Brands by name

Popular brands

Krone AX 250 D, Original Operating Instruction

Search results

Summary of Contents for AX 250 D

Reviews:

Brands by name

Popular brands