manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 156

KRONE ISOBUS Terminal - loading operation

 

 

156 

 

Pos: 129.52.51.5 /Überschriften/Überschriften 2/K-O/Menü „Geradeausfahrt kalibrieren @ 228\mod_1392821791282_78.docx @ 1833523 @ 2 @ 1 

 

11.3 

“Calibrating Straight-Ahead Driving” Menu  

Pos: 129.52.51.6 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Elektronische Zwangslenkung/Menü „Geradeausfahrt kalibrieren Bild AX/MX/ZX @ 266\mod_1400651723331_78.docx @ 2019234 @  @ 1 

 

CC000707_1

DEF

CC000706_1

DEF

 

Fig. 98  

Pos: 129.52.51.7 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Elektronische Zwangslenkung/Menü „Geradeausfahrt kalibrieren Softkeys und Text @ 228\mod_1392824262256_78.docx @ 1833821 @  @ 1 

 

Softkey 

Description 

 

Changes to the „Electronic Forced Steering“ menu 

 

Switches the steering axle to guided coast-down 

 

Leave the menu without saving 

 

Save the calibration 

 

Reset to factory setting 

 

Calibrating the tractor for straight-ahead driving: 

• 

Press function key for softkey 

. 

• 

The tractor must drive forward with a speed of less than 5 km/h until the loading wagon is 
straight behind the tractor. 

• 

Press the function key for softkey 

 to save the calibration. 

• 

Press the function key for softkey 

 so that the calibration is not saved.  

• 

Press the function key for softkey 

 

 to bring up the factory setting.  

 

 

Note 

The track rod must be adjusted if the calibration cannot be saved. 

 

 

Pos: 129.52.51.8 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands