manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 139

 

KRONE ISOBUS Terminal

 

139 

 

Pos: 129.41.6 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Softkeys für die Funktionstasten/Beschreibung aller Funktionstasten AX/MX/ZX T2 @ 265\mod_1400226328287_78.docx @ 2010927 @  @ 1 

 

Softkey 

Meaning 

Information 

 

Switching the working floodlight off 

If the tractor control unit (T-ECU) 
provides data for lighting, the 
automatic working light mode can be 
switched on. 

 

Switching the working floodlight on 

/ 

 

Switching automatic working light mode 
off 

The working lights of the machine are 
switched on and off from the tractor. 

 

Raise loading area cover 

 

 

Lower loading area cover 

 

 

Extend ejector 

 

 

Retract ejector 

 

 

Raise chopping flap / loading flap 

 

 

Lower chopping flap / loading flap 

 

 

Swivel front wall out of the wagon 

 

 

Swivel front wall into the wagon 

 

 

Fold blades in 

 

 

Fold blades out 

 

 

Deactivate automatic floor conveyor  

Press and hold down to open the 
Automatic floor conveyor menu. 

 

Activate automatic floor conveyor  

 

Activate floor conveyor reverse 

 

 

Activate floor conveyor supply 

 

 

Switching rapid traverse on and off 

Rapid traverse is not available until 
the floor conveyor supply has been 
switched on. 

 

Pos: 129.41.7 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands