manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 285

 

Operation

 

285 

 

Pos: 144.3 /BA/Bedienung /Ladewagen/Querförderband/AX/MX_Baureihe/Querförderband herausziehen AX/MX @ 4\mod_1211892050931_78.docx @ 83943 @ 3 @ 1 

 

15.14.1 

Pull out cross conveyor  

12

AX000055

13

14

Fig. 171 

To do this: 

• 

Open the interlocks (13) on the right and left sides of the machine by pulling the wire handle 
(12) and withdraw the cross conveyor (14) up to the stop. 

 

Pos: 144.4 /BA/Bedienung /Ladewagen/Querförderband/AX/MX_Baureihe/Querförderband sichern AX/MX @ 4\mod_1211892929900_78.docx @ 83984 @ 3 @ 1 

 

15.14.2 

Securing the cross conveyor  

15

16 17

AX000054

Fig. 172 

To do this: 

• 

Using the control unit, carefully lower the tailgate until the stops (15) can be attached. 

• 

Set stops (15) on the threaded pieces and secure with washers (16) and nuts (17). 

 

Pos: 144.5 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands