manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 181

 

KRONE ISOBUS Terminal - Menus

 

181 

 

Pos: 129.75.8 /Überschriften/Zwischenüberschriften/Funktionstasten @ 266\mod_1400568093335_78.docx @ 2015975 @  @ 1 

 

Function keys 

Pos: 129.75.9 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Hauptmenüs/Beschreibung Symbol für Funktionstasten Sensortest / Aktortest aufrufen @ 220\mod_1391167609069_78.docx @ 1778787 @  @ 1 

 

Symbol 

Meaning 

Information 

 

Displaying “Sensor Test” menu 

In the “Sensor Test” menu, only the 
corresponding sensors for this menu are 
displayed. 

 

Displaying “Actuator Test” menu 

In the “Actuator Test” menu, only the 
corresponding actuators for this menu 
are displayed. 

 

Pos: 129.75.10 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Hauptmenüs/Hauptmenü 1 2014/Hauptmenü 1 Ladefunktionen/Untermenü 1-2 Deichselautomatik/Untermenü 1-2 Deichselautomatik Deichsel-Vorgewendeposition erhöhen / verringern @ 262\mod_1399974992017_78.docx @ 2003131 @  @ 1 

 

Increasing / reducing drawbar headland position  

 

 

Note 

If the value is changed in this menu, the drawbar is adjusted directly. 

 

Changing position for drawbar headland position 

• 

To increase the value, press 

 . 

• 

To reduce the value, press 

 . 

• 

To save the value, press 

 . 

 
Changing the value for drawbar working position 
Either 

• 

To increase the value, press 

 . 

• 

To reduce the value, press 

 . 

• 

To save, press 

 . 

or  

• Press 

 and hold down until the working position is reached. 

 

Pos: 129.76 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands