manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 258

Third-party ISOBUS terminal

 

 

258 

 

Pos: 135.16 /BA/Info-Center/Iso-Bedienung/Ladewagen/Arbeitsscheinwerfer ein- ausschalten TECU-gesendet @ 268\mod_1400772898052_78.docx @ 2024133 @ 2 @ 1 

 

14.3 

Automatic working lights  

If the tractor control unit (T-ECU) provides data for lighting, the working lights of the machine in 
"automatic working light mode" can be switched on-and off from the tractor. The working lights 
can also be operated manually. 

 

ISB

CC000773

 

Fig. 157 
Status line (I): 

 Working lights off (in manual mode) 

 Working lights on (in manual mode) 

Working lights off (in automatic working light mode) 

 Working lights on (in automatic working light mode) 

 

Pos: 135.17 /Überschriften/Überschriften 3/A-E/A/Arbeitsscheinwerfer ein- /ausschalten @ 183\mod_1378131463155_78.docx @ 1568917 @ 3 @ 1 

 

14.3.1 

Switching Working Floodlights On and Off   

Pos: 135.18 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Grundbild Entladebetrieb/Arbeitsscheinwerfer ein- ausschalten TECU-gesendet Einführtext @ 268\mod_1401113699098_78.docx @ 2027617 @  @ 1 

 

If the tractor control unit (T-ECU) provides data for lighting, the working lights of the machine in 
"automatic working light mode" can be switched on-and off from the tractor. The working lights 
can also be operated manually. 
 

Pos: 135.19 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Ladewagen/Grundbild Entladebetrieb/Arbeitsscheinwerfer ein- ausschalten TECU-gesendet automatik @ 267\mod_1400759588440_78.docx @ 2023546 @  @ 1 

 

Activating automatic working lights: 

– 

As a pre-condition, the tractor control unit (T-ECU) provides data for the lighting. 

• 

To activate the automatic working lights, press 

. 

Either the 

 

softkey or the 

 softkey is displayed. 

 

Deactivating automatic working lights: 

• 

To deactivate the automatic working lights, press 

 or 

 . 

Either the 

 softkey or the 

 softkey is displayed. 

 

Pos: 135.20 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands