manualshive.com logo in svg

Krone AX 250 D, Original Operating Instruction

Share
Download
Krone AX 250 D Original Operating Instruction Download Page 341

 

Maintenance - Gearbox

 

341 

 

Pos: 202.9.1 /Überschriften/Überschriften 2/A-E/Dosierwalzengetriebe hinten (GD) @ 0\mod_1199975492178_78.docx @ 38334 @ 2 @ 1 

 

19.5 

Discharge roller gear rear (GD) 

Pos: 202.9.2 /BA/Wartung/Ölkontrolle_Wechsel/Ladewagen/Bild_Dosierwalzengetriebe hinten AX @ 3\mod_1203603977189_78.docx @ 67663 @  @ 1 

 

AX000017

2

1

Figure 217 

Pos: 202.9.3 /BA/Wartung/Ölkontrolle_Wechsel/Ölwechsel / Ölkontrolle:Legende zu Grafik Kontrollschraube /  Ablassschraube @ 194\mod_1383299451132_78.docx @ 1648045 @  @ 1 

 

1) 

Inspection screw / control hole 

2) 

Drain plug 

 

Pos: 202.9.4 /BA/Wartung/Ölkontrolle_Wechsel/Ölkontrolle / Ölwechsel Intervall: siehe Kapitel Wartung „Wartungstabelle“ @ 134\mod_1350483605921_78.docx @ 1188115 @  @ 1 

 

Interval for oil level check and oil change: refer to chapter Maintenance “Maintenance Table” 

Pos: 202.9.5 /BA/Wartung/Ölkontrolle_Wechsel/Ölqualität /Ölmenge: siehe Kapitel  Technische Daten @ 134\mod_1350483480921_78.docx @ 1188085 @  @ 1 

 

Oil Quality / Amount of Oil: Refer to Chapter Technical Data “Lubricants” 

Pos: 202.9.6 /BA/Wartung/Ölkontrolle_Wechsel/Altölentsorgung: siehe Kapitel Sicherheit „Betriebsstoffe“ @ 280\mod_1405428392269_78.docx @ 2152765 @  @ 1 

 

Used oil disposal: see chapter Safety "Consumables" 

Pos: 202.9.7 /BA/Sicherheit/8. Voraussetzungen/Handlungsanweisung für alle Maschinen/Handlungsanweisung: Maschine stillsetzen und sichern @ 274\mod_1404365253849_78.docx @ 2065151 @  @ 1 

 

• 

Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting 
down and safeguarding the machine". 

Pos: 202.9.8 /BA/Wartung/Ölkontrolle_Wechsel/Ölkontrolle NEU über Kontrollschraube @ 140\mod_1355141753680_78.docx @ 1244582 @  @ 1 

 

Oil level check: 

• 

Screw out inspection screw. 

• 

Oil level up to control hole. 

If the oil reaches the control hole: 

• 

Screw in the inspection screw and tighten it securely. 

If the oil does not reach the control hole:

 

• 

Screw out filler plug. 

• 

Top up oil via oil filling hole until the control hole is reached. 

• 

Screw in the inspection screw and the filler plug and tighten them securely. 

Pos: 202.9.9 /BA/Wartung/Ölkontrolle_Wechsel/Ölwechsel NEU ohne Einfüllschraube @ 158\mod_1364483760090_78.docx @ 1391770 @  @ 1 

 

Oil change: 

Collect escaping oil in a suitable container. 
• 

Screw out oil drain plug and drain the oil. 

• 

Screw out inspection screw. 

• 

Screw in oil drain plug and tighten it securely. 

• 

Top up new oil via control hole until the control hole is reached. 

• 

Screw in the inspection screw and tighten it securely. 

 

Pos: 203 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for AX 250 D















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands