Kontron CP6923, Reference Manual, Page: 90 / 480

Switching Commands CP6923
CP6923 CLI Reference Manual Page 2 - 46
2.11.15 dot1x timeout
This command sets the value, in seconds, of the timer used by the authenticator state machine on this port.
Depending on the token used and the value (in seconds) passed, various timeout configurable parameters are set.
The following tokens are supported:
2.11.15.1 no dot1x timeout
This command sets the value, in seconds, of the timer used by the authenticator state machine on this port to the
default values. Depending on the token used, the corresponding default values are set.
2.11.16 dot1x unauthenticated-vlan
Use this command to configure the unauthenticated VLAN associated with that port. The unauthenticated VLAN ID
can be a valid VLAN ID from 0-Maximum supported VLAN ID (3965 for FASTPATH Enterprise). The
unauthenticated VLAN must be statically configured in the VLAN database to be operational. By default, the
unauthenticated VLAN is 0, i.e. invalid and not operational.
Tokens Definition
reauth-period The value, in seconds, of the timer used by the authenticator state machine on this port to
determine when re-authentication of the supplicant takes place. The reauth-period must be a
value in the range 1 - 65535.
quiet-period The value, in seconds, of the timer used by the authenticator state machine on this port to
define periods of time in which it will not attempt to acquire a supplicant. The quiet-period must
be a value in the range 0 - 65535.
tx-period The value, in seconds, of the timer used by the authenticator state machine on this port to
determine when to send an EAPOL EAP Request/Identity frame to the supplicant. The quiet-
period must be a value in the range 1 - 65535.
supp-timeout The value, in seconds, of the timer used by the authenticator state machine on this port to
timeout the supplicant. The supp-timeout must be a value in the range 1 - 65535.
server-timeout The value, in seconds, of the timer used by the authenticator state machine on this port to
timeout the authentication server. The supp-timeout must be a value in the range 1 - 65535.
Default • reauth-period: 3600 seconds
• quiet-period: 60 seconds
• tx-period: 30 seconds
• supp-timeout: 30 seconds
• server-timeout: 30 seconds
Format dot1x timeout {{reauth-period <seconds>} | {quiet-period <seconds>} |
{tx-period <seconds>} | {supp-timeout <seconds>} | {server-timeout
<seconds>}}
Mode Interface Config
Format
no dot1x timeout {reauth-period | quiet-period | tx-period | supp-timeout
| server-timeout}
Mode Interface Config
Default 0
Format
dot1x unauthenticated-vlan <vlan id>
Mode Interface Config