Kontron CP6923, Reference Manual, Page: 271 / 480

CP6923 Routing Commands
Page 4 - 59 CP6923 CLI Reference Manual
4.8.64 show ip ospf stub table
This command displays the OSPF stub table. The information below will only be displayed if OSPF is initialized on
the switch.
4.8.65 show ip ospf virtual-link
This command displays the OSPF Virtual Interface information for a specific area and neighbor. The
< areaid >
parameter identifies the area and the < neighbor > parameter identifies the neighbor's Router ID.
4.8.66 show ip ospf virtual-link brief
This command displays the OSPF Virtual Interface information for all areas in the system.
Format
show ip ospf stub table
Modes • Privileged EXEC
• User EXEC
Term Definition
Area ID A 32-bit identifier for the created stub area.
Type of Service The type of service associated with the stub metric. FASTPATH only supports Normal TOS.
Metric Val The metric value is applied based on the TOS. It defaults to the least metric of the type of
service among the interfaces to other areas. The OSPF cost for a route is a function of the
metric value.
Import Summary
LSA
Controls the import of summary LSAs into stub areas.
Format
show ip ospf virtual-link < areaid > < neighbor >
Modes • Privileged EXEC
• User EXEC
Term Definition
Area ID The area id of the requested OSPF area.
Neighbor Router ID The input neighbor Router ID.
Hello Interval The configured hello interval for the OSPF virtual interface.
Dead Interval The configured dead interval for the OSPF virtual interface.
Iftransit Delay
Interval
The configured transit delay for the OSPF virtual interface.
Retransmit Interval The configured retransmit interval for the OSPF virtual interface.
Authentication
Type
The configured authentication type of the OSPF virtual interface.
State The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router,
and backup designated router. This is the state of the OSPF interface.
Neighbor State The neighbor state.
Format
show ip ospf virtual-link brief
Modes • Privileged EXEC
• User EXEC