Kontron CP6923, Reference Manual, Page: 65 / 480

CP6923 Switching Commands
Page 2 - 21 CP6923 CLI Reference Manual
2.3.2.1 no network mgmt_vlan
This command sets the Management VLAN ID to the default.
2.3.3 vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification number (ID 1 is
reserved for the default VLAN). VLAN range is 2-4094.
2.3.3.1 no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is reserved for the
default VLAN). The VLAN range is 2-4094.
2.3.4 vlan acceptframe
This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged frames or priority
frames received on this interface are discarded. For Admit All mode, untagged frames or priority frames received on
this interface are accepted and assigned the value of the interface VLAN ID for this port. With either option, VLAN
tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
2.3.4.1 no vlan acceptframe
This command resets the frame acceptance mode for the interface to the default value.
2.3.5 vlan ingressfilter
This command enables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs that do not
match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of
that VLAN.
Mode Privileged EXEC
Format
no network mgmt_vlan
Mode Privileged EXEC
Format
vlan <2-4094>
Mode VLAN Config
Format no vlan <2-4094>
Mode VLAN Config
Default all
Format
vlan acceptframe {vlanonly | all}
Mode Interface Config
Format
no vlan acceptframe
Mode Interface Config
Default disabled