Kontron CP6923, Reference Manual, Page: 144 / 480

Switching Commands CP6923
CP6923 CLI Reference Manual Page 2 - 100
2.19.4.1 no set igmp querier version
Use this command to set the IGMP Querier version to its default value.
2.19.5 set igmp querier election participate
Use this command to enable the Snooping Querier to participate in the Querier Election process when it discovers
the presence of another Querier in the VLAN. When this mode is enabled, if the Snooping Querier finds that the
other Querier’s source address is better (less) than the Snooping Querier’s address, it stops sending periodic
queries. If the Snooping Querier wins the election, then it will continue sending periodic queries.
2.19.5.1 no set igmp querier election participate
Use this command to set the Snooping Querier not to participate in querier election but go into non-querier mode as
soon as it discovers the presence of another querier in the same VLAN.
2.19.6 show igmpsnooping querier
Use this command to display IGMP Snooping Querier information. Configured information is displayed whether or
not IGMP Snooping Querier is enabled.
When the optional argument <
vlanid
> is not used, the command displays the following information.
When you specify a value for <
vlanid
>, the following additional information appears.
Format
no set igmp querier version
Mode Global Config
Default disabled
Format
set igmp querier election participate <vlanid>
Mode VLAN Config
Format
no set igmp querier election participate <vlanid>
Mode VLAN Config
Format
show igmpsnooping querier [{detail | vlan < vlanid >}]
Mode Privileged EXEC
Field Description
Admin Mode Indicates whether or not IGMP Snooping Querier is active on the switch.
Admin Version The version of IGMP that will be used while sending out the queries.
Querier Address The IP Address which will be used in the IPv4 header while sending out IGMP queries. It can
be configured using the appropriate command.
Query Interval The amount of time in seconds that a Snooping Querier waits before sending out the periodic
general query.
Querier Timeout The amount of time to wait in the Non-Querier operational state before moving to a Querier
state.
Field Description
VLAN Admin Mode Indicates whether iGMP Snooping Querier is active on the VLAN.