Kontron CP6923, Reference Manual, Page: 361 / 480

CP6923 Utility Commands
Page 6 - 47 CP6923 CLI Reference Manual
6.8.23 clear ip dhcp conflict
The command is used to clear an address conflict from the DHCP Server database. The server detects conflicts
using a ping. DHCP server clears all conflicts If the asterisk (*) character is used as the address parameter.
6.8.24 show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP server. If no IP address is
specified, the bindings corresponding to all the addresses are displayed.
6.8.25 show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP server. If no IP address is
specified, the bindings corresponding to all the addresses are displayed.
6.8.26 show ip dhcp pool configuration
This command displays pool configuration. If
all
is specified, configuration for all the pools is displayed.
Default none
Format
clear ip dhcp conflict {<address> | *}
Mode Privileged EXEC
Format
show ip dhcp binding [<address>]
Modes • Privileged EXEC
• User EXEC
Term Definition
IP address The IP address of the client.
Hardware Address The MAC Address or the client identifier.
Lease expiration The lease expiration time of the IP address assigned to the client.
Type The manner in which IP address was assigned to the client.
Format
show ip dhcp global configuration
Modes • Privileged EXEC
• User EXEC
Term Definition
Service DHCP The field to display the status of dhcp protocol.
Number of Ping
Packets
The maximum number of Ping Packets that will be sent to verify that an ip address id not
already assigned.
Conflict Logging Shows whether conflict logging is enabled or disabled.
BootP Automatic Shows whether BootP for dynamic pools is enabled or disabled.
Format
show ip dhcp pool configuration {<name> | all}
Modes • Privileged EXEC
• User EXEC