Kontron CP6923, Reference Manual, Page: 389 / 480

CP6923 Management Commands
Page 7 - 3 CP6923 CLI Reference Manual
7.1.3 serviceport protocol
This command specifies the network management port configuration protocol. If you modify this value, the change
is effective immediately. If you use the
bootp
parameter, the switch periodically sends requests to a BootP server
until a response is received. If you use the dhcp parameter, the switch periodically sends requests to a DHCP server
until a response is received. If you use the
none
parameter, you must configure the network information for the
switch manually.
7.1.4 network parms
This command sets the IP address, subnet mask and gateway of the device. The IP address and the gateway must
be on the same subnet.
7.1.5 network protocol
This command specifies the network configuration protocol to be used. If you modify this value, change is effective
immediately. If you use the
bootp
parameter, the switch periodically sends requests to a BootP server until a
response is received. If you use the
dhcp
parameter, the switch periodically sends requests to a DHCP server until
a response is received. If you use the
none
parameter, you must configure the network information for the switch
manually.
7.1.6 network mac-address
This command sets locally administered MAC addresses. The following rules apply:
• Bit 6 of byte 0 (called the U/L bit) indicates whether the address is universally administered (b'0') or locally
administered (b'1').
• Bit 7 of byte 0 (called the I/G bit) indicates whether the destination address is an individual address (b'0') or a
group address (b'1').
• The second character, of the twelve character macaddr, must be 2, 6, A or E.
A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').
Format
serviceport protocol {none | bootp | dhcp}
Mode Privileged EXEC
Format
network parms <ipaddr> <netmask> [<gateway>]
Mode Privileged EXEC
Default none
Format
network protocol {none | bootp | dhcp}
Mode Privileged EXEC
Format
network mac-address <macaddr>
Mode Privileged EXEC