Kontron CP6923, Reference Manual, Page: 245 / 480

CP6923 Routing Commands
Page 4 - 33 CP6923 CLI Reference Manual
4.8.12 area nssa translator-stab-intv (OSPF)
This command configures the translator
<stabilityinterval>
of the NSSA. The
<stabilityinterval>
is
the period of time that an elected translator continues to perform its duties after it determines that its translator status
has been deposed by another router.
4.8.12.1 no area nssa translator-stab-intv (OSPF)
This command disables the nssa translator’s
<stabilityinterval>
from the specified area id.
4.8.13 area range (OSPF)
This command creates a specified area range for a specified NSSA. The
<ipaddr>
is a valid IP address. The
<subnetmask>
is a valid subnet mask. The LSDB type must be specified by either
summarylink
or
nssaexternallink
, and the advertising of the area range can be allowed or suppressed.
4.8.13.1 no area range
This command deletes a specified area range. The
<ipaddr>
is a valid IP address. The
<subnetmask>
is a valid
subnet mask.
4.8.14 area stub (OSPF)
This command creates a stub area for the specified area ID. A stub area is characterized by the fact that AS External
LSAs are not propagated into the area. Removing AS External LSAs and Summary LSAs can significantly reduce
the link state database of routers within the stub area.
4.8.14.1 no area stub
This command deletes a stub area for the specified area ID.
Format
area <areaid> nssa translator-stab-intv <stabilityinterval>
Mode Router OSPF Config
Format
no area <areaid> nssa translator-stab-intv <stabilityinterval>
Mode Router OSPF Config
Format
area <areaid> range <ipaddr> <subnetmask> {summarylink |
nssaexternallink} [advertise | not-advertise]
Mode Router OSPF Config
Format
no area <areaid> range <ipaddr> <subnetmask>
Mode Router OSPF Config
Format
area <areaid> stub
Mode Router OSPF Config
Format no area <areaid> stub
Mode Router OSPF Config