Kontron CP6923, Reference Manual, Page: 418 / 480

Management Commands CP6923
CP6923 CLI Reference Manual Page 7 - 32
format, enter the key along with the encrypted keyword. In the show running config command’s display, these secret
keys are displayed in encrypted format. You cannot show these keys in plain text format.
Example: The following shows an example of the CLI command.
radius server key acct 10.240.4.10 encrypted <encrypt-string>
7.9.6 radius server msgauth
This command enables the message authenticator attribute for a specified server.
7.9.6.1 no radius server msgauth
This command disables the message authenticator attribute for a specified server.
7.9.7 radius server primary
This command is used to configure the primary RADIUS authentication server for this RADIUS client. The primary
server handles RADIUS requests. The remaining configured servers are only used if the primary server cannot be
reached. You can configure up to three servers on each client. Only one of these servers can be configured as the
primary. If a primary server is already configured prior to this command being executed, the server specified by the
IP address or hostname specified used in this command will become the new primary server. The IP address or
hostname must match that of a previously configured RADIUS authentication server.
7.9.8 radius server retransmit
This command sets the maximum number of times a request packet is re-transmitted when no response is received
from the RADIUS server. The retries value is an integer in the range of 1 to 15.
Note: The secret must be an alphanumeric value not exceeding 16 characters.
Format
radius server key {auth | acct} <ipaddr|hostname> [encrypted <encrypted-
password>]
Mode Global Config
Format radius server msgauth <ipaddr|hostname>
Mode Global Config
Format
no radius server msgauth <ipaddr|hostname>
Mode Global Config
Format
radius server primary <ipaddr|hostname>
Mode Global Config
Default 4
Format
radius server retransmit <retries>
Mode Global Config