Kontron CP6923, Reference Manual, Page: 276 / 480

Routing Commands CP6923
CP6923 CLI Reference Manual Page 4 - 64
4.9.13 split-horizon
This command sets the RIP split horizon mode. Split horizon is a technique for avoiding problems caused by
including routes in updates sent to the router from which the route was originally learned. The options are: None -
no special processing for this case. Simple - a route will not be included in updates sent to the router from which it
was learned. Poisoned reverse - a route will be included in updates sent to the router from which it was learned, but
the metric will be set to infinity.
4.9.13.1 no split-horizon
This command sets the default RIP split horizon mode.
4.9.14 redistribute (RIP)
This command configures RIP protocol to redistribute routes from the specified source protocol/routers. There are
five possible match options. When you submit the command redistribute ospf match
<
match-type
>
the match-type
or types specified are added to any match types presently being redistributed. Internal routes are redistributed by
default.
4.9.14.1 no redistribute
This command de-configures RIP protocol to redistribute routes from the specified source protocol/routers.
4.9.15 show ip rip
This command displays information relevant to the RIP router.
Default simple
Format
split-horizon {none | simple | poison}
Mode Router RIP Config
Format
no split-horizon
Mode Router RIP Config
Default • metric—not-configured
• match—internal
Format for
OSPF as
source
protocol
redistribute ospf [metric <0-15>] [match [internal] [external 1]
[external 2] [nssa-external 1] [nssa-external-2]]
Format for
other source
protocol
redistribute {bgp | static | connected} [metric <0-15>]
Mode Router RIP Config
Format
no redistribute {ospf | bgp | static | connected} [metric] [match
[internal] [external 1] [external 2] [nssa-external 1] [nssa-external-
2]]
Mode Router RIP Config
Format
show ip rip