Kontron CP6923, Reference Manual, Page: 351 / 480

CP6923 Utility Commands
Page 6 - 37 CP6923 CLI Reference Manual
6.7.5 sntp unicast client poll-timeout
This command will set the poll timeout for SNTP unicast clients in seconds to a value from 1-30.
6.7.5.1 no sntp unicast client poll-timeout
This command will reset the poll timeout for SNTP unicast clients to its default value.
6.7.6 sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients to a value from 0 to 10.
6.7.6.1 no sntp unicast client poll-retry
This command will reset the poll retry for SNTP unicast clients to its default value.
6.7.7 sntp server
This command configures an SNTP server (a maximum of three). The optional priority can be a value of 1-3, the
version a value of 1-4, and the port id a value of 1-65535.
6.7.7.1 no sntp server
This command deletes an server from the configured SNTP servers.
6.7.8 show sntp
This command is used to display SNTP settings and status.
Default 5
Format
sntp unicast client poll-timeout <poll-timeout>
Mode Global Config
Format no sntp unicast client poll-timeout
Mode Global Config
Default 1
Format
sntp unicast client poll-retry <poll-retry>
Mode Global Config
Format
no sntp unicast client poll-retry
Mode Global Config
Format
sntp server <ipaddress|hostname> [<priority> [<version> [<portid>]]]
Mode Global Config
Format
no sntp server remove <ipaddress|hostname>
Mode Global Config
Format
show sntp