Kontron CP6923, Reference Manual, Page: 183 / 480

CP6923 Quality of Service (QoS) Commands
Page 3 - 9 CP6923 CLI Reference Manual
3.3.1 class-map
This command defines a DiffServ class of type match-all. When used without any match condition, this command
enters the class-map mode. The
<class-map-name>
is a case sensitive alphanumeric string from 1 to 31
characters uniquely identifying an existing DiffServ class.
The class type of
match-all
indicates all of the individual match conditions must be true for a packet to be
considered a member of the class.This command may be used without specifying a class type to enter the Class-
Map Config mode for an existing DiffServ class.
3.3.1.1 no class-map
This command eliminates an existing DiffServ class. The
<class-map-name>
is the name of an existing DiffServ
class. (The class name ‘default’ is reserved and is not allowed here.) This command may be issued at any time; if
the class is currently referenced by one or more policies or by any other class, the delete action fails.
3.3.2 class-map rename
This command changes the name of a DiffServ class. The
<class-map-name>
is the name of an existing DiffServ
class. The
<new-class-map-name>
parameter is a case-sensitive alphanumeric string from 1 to 31 characters
uniquely identifying the class.
3.3.3 match ethertype
This command adds to the specified class definition a match condition based on the value of the ethertype. The
<ethertype>
value is specified as one of the following keywords:
appletalk
,
arp
,
ibmsna
,
ipv4
,
ipv6
,
ipx
,
Note: The class-map-name 'default' is reserved and must not be used.
Note: The optional keywords
[{ipv4 | ipv6}]
specify the Layer 3 protocol for this class. If not
specified, this parameter defaults to ‘ipv4’ . This maintains backward compatibility for configurations
defined on systems before IPv6 match items were supported.
Note: The CLI mode is changed to Class-Map Config or Ipv6-Class-Map Config when this command is
successfully executed depending on the
[{ipv4 | ipv6}]
keyword specified.
Format
class-map match-all <class-map-name> [{ipv4 | ipv6}]
Mode Global Config
Format
no class-map <class-map-name>
Mode Global Config
Default none
Format
class-map rename <class-map-name> <new-class-map-name>
Mode Global Config