Kontron CP6923, Reference Manual, Page: 378 / 480

Utility Commands CP6923
CP6923 CLI Reference Manual Page 6 - 64
LS_ACK packet field definitions.
6.11.17.1 no debug ospf packet
This command disables tracing of OSPF packets.
6.11.18 debug ping packet
This command enables tracing of ICMP echo requests and responses. The command traces pings on the network
port/ serviceport for switching packages. For routing packages, pings are traced on the routing ports as well.
A sample output of the trace message is shown below.
<15> JAN 01 00:21:22 192.168.17.29-1 SIM[181040176]: sim_debug.c(128) 20 % Pkt TX -
Intf: 1/0/1(1),
SRC_IP:10.50.50.2, DEST_IP:10.50.50.1, Type:ECHO_REQUEST
<15> JAN 01 00:21:22 192.168.17.29-1 SIM[182813968]: sim_debug.c(82) 21 % Pkt RX -
Intf: 1/0/1(1), S
RC_IP:10.50.50.1, DEST_IP:10.50.50.2, Type:ECHO_REPLY
The following parameters are displayed in the trace message:
Field Definition
Length Length of packet
Field Definition
Length Length of packet
Format
no debug ospf packet
Mode Privileged EXEC
Default disabled
Format
debug ping packet
Mode Privileged EXEC
Parameter Definition
TX/RX TX refers to a packet transmitted by the device. RX refers to packets received by the device.
Intf The interface that the packet came in or went out on. Format used is unit/slot/port (internal
interface number). Unit is always shown as 1 for interfaces on a non-stacking device.
SRC_IP The source IP address in the IP header in the packet.
DEST_IP The destination IP address in the IP header in the packet.
Type Type determines whether or not the ICMP message is a REQUEST or a RESPONSE.