Kontron CP6923, Reference Manual, Page: 240 / 480

Routing Commands CP6923
CP6923 CLI Reference Manual Page 4 - 28
4.6.3.1 no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP Relay on the system.
4.6.4 show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
4.7 IP Helper Commands
This section describes the commands to configure a DHCP relay agent with multiple DHCP server addresses per
routing interface, and to use different server addresses for client packets arriving on different interfaces on the relay
agent.
4.7.1 ip helper-address
Use this command to add a unicast helper address to the list of helper addresses on an interface. This is the address
of a DHCP server. This command can be applied multiple times on the routing interface to form the helper addresses
list until the list reaches the maximum supported helper addresses.
4.7.1.1 no ip helper-address
Use this command to remove the IP address from the previously configured list. The no command without an
<
ip-
address
>
argument removes the entire list of helper addresses on that interface.
Format
no bootpdhcprelay minwaittime
Mode Global Config
Format
show bootpdhcprelay
Modes • Privileged EXEC
• User EXEC
Term Definition
Maximum Hop
Count
The maximum allowable relay agent hops.
Minimum Wait
Time (Seconds)
The minimum wait time.
Admin Mode Indicates whether relaying of requests is enabled or disabled.
Server IP Address The IP address for the BootP/DHCP Relay server.
Circuit Id Option
Mode
The DHCP circuit Id option which may be enabled or disabled.
Requests Received The number or requests received.
Requests Relayed The number of requests relayed.
Packets Discarded The number of packets discarded.
Format
ip helper-address < ip-address >
Mode Interface Config