Kontron CP6923, Reference Manual, Page: 84 / 480

Switching Commands CP6923
CP6923 CLI Reference Manual Page 2 - 40
2.10.1.1 no set gmrp adminmode
This command disables GARP Multicast Registration Protocol (GMRP) on the system.
2.10.2 set gmrp interfacemode
This command enables GARP Multicast Registration Protocol on a single interface (Interface Config mode) or all
interfaces (Global Config mode). If an interface which has GARP enabled is enabled for routing or is enlisted as a
member of a port-channel (LAG), GARP functionality is disabled on that interface. GARP functionality is
subsequently re-enabled if routing is disabled and port-channel (LAG) membership is removed from an interface
that has GARP enabled.
2.10.2.1 no set gmrp interfacemode
This command disables GARP Multicast Registration Protocol on a single interface or all interfaces. If an interface
which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel (LAG), GARP
functionality is disabled. GARP functionality is subsequently re-enabled if routing is disabled and port-channel (LAG)
membership is removed from an interface that has GARP enabled.
2.10.3 show gmrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for one or all interfaces.
Format
no set gmrp adminmode
Mode Privileged EXEC
Default disabled
Format
set gmrp interfacemode
Mode • Interface Config
• Global Config
Format
no set gmrp interfacemode
Mode • Interface Config
• Global Config
Format
show gmrp configuration {<slot/port> | all}
Mode • Privileged EXEC
• User EXEC
Term Definition
Interface The slot/port of the interface that this row in the table describes.
Join Timer The interval between the transmission of GARP PDUs registering (or re-registering)
membership for an attribute. Current attributes are a VLAN or multicast group. There is an
instance of this timer on a per-port, per-GARP participant basis. Permissible values are 10 to
100 centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds).
The finest granularity of specification is 1 centisecond (0.01 seconds).
Leave Timer The period of time to wait after receiving an unregister request for an attribute before deleting
the attribute. Current attributes are a VLAN or multicast group. This may be considered a
buffer time for another station to assert registration for the same attribute in order to maintain
uninterrupted service. There is an instance of this timer on a per-Port, per-GARP participant
basis. Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory default
is 60 centiseconds (0.6 seconds).