Kontron CP6923, Reference Manual, Page: 163 / 480

CP6923 Switching Commands
Page 2 - 119 CP6923 CLI Reference Manual
2.24.1 lldp med
Use this command to enable MED. By enabling MED, you will be effectively enabling the transmit and receive
function of LLDP.
2.24.1.1 no lldp med
Use this command to disable MED.
2.24.2 lldp med confignotification
Use this command to configure all the ports to send the topology change notification.
2.24.2.1 no ldp med confignotification
Use this command to disable notifications.
2.24.3 lldp med transmit-tlv
Use this command to specify which optional Type Length Values (TLVs) in the LLDP MED set will be transmitted in
the Link Layer Discovery Protocol Data Units (LLDPDUs).
Default disabled
Format
lldp med
Mode Interface Config
Format
no lldp med
Mode Interface Config
Default disabled
Format
lldp med confignotification
Mode Interface Config
Format
no lldp med confignotification
Mode Interface Config
Default By default, the capabilities and network policy TLVs are included.
Format
lldp med transmit-tlv [capabilities] [ex-pd] [ex-pse] [inventory]
[location] [network-policy]
Mode Interface Config
Term Definition
capabilities Transmit the LLDP capabilities TLV.
ex-pd Transmit the LLDP extended PD TLV.
ex-pse Transmit the LLDP extended PSE TLV.
inventory Transmit the LLDP inventory TLV.
location Transmit the LLDP location TLV.
network-policy Transmit the LLDP network policy TLV.