Kontron CP6923, Reference Manual, Page: 290 / 480

Multicast Commands CP6923
CP6923 CLI Reference Manual Page 5 - 6
If you use the summary parameter, the command displays the following column headings in the output table:
5.2 DVMRP Commands
This section provides a detailed explanation of the Distance Vector Multicast Routing Protocol (DVMRP) commands.
5.2.1 ip dvmrp
This command sets administrative mode of DVMRP in the router to active.
5.2.1.1 no ip dvmrp
This command sets administrative mode of DVMRP in the router to inactive.
5.2.2 ip dvmrp metric
This command configures the metric for an interface. This value is used in the DVMRP messages as the cost to
reach this network. This field has a range of 1 to 31.
5.2.2.1 no ip dvmrp metric
This command resets the metric for an interface to the default value. This value is used in the DVMRP messages
as the cost to reach this network.
RPF Neighbor The IP address of the RPF neighbor.
Flags The flags associated with this entry.
Term Definition
Source IP Addr The IP address of the multicast data source.
Group IP Addr The IP address of the destination of the multicast packet.
Protocol The multicast routing protocol by which this entry was created.
Incoming Interface The interface on which the packet for this source arrives.
Outgoing Interface
List
The list of outgoing interfaces on which this packet is forwarded.
Default disabled
Format ip dvmrp
Mode Global Config
Format
no ip dvmrp
Mode Global Config
Default 1
Format
ip dvmrp metric
<
metric
>
Mode Interface Config
Format
no ip dvmrp metric
Term Definition