Kontron CP6923, Reference Manual, Page: 86 / 480

Switching Commands CP6923
CP6923 CLI Reference Manual Page 2 - 42
To authenticate a user, the first authentication method in the user’s login (authentication login list) is attempted.
FASTPATH software does not utilize multiple entries in the user’s login. If the first entry returns a timeout, the user
authentication attempt fails.
2.11.1.1 no authentication login
This command deletes the specified authentication login list. The attempt to delete fails if any of the following
conditions are true:
• The login list name is invalid or does not match an existing authentication login list
• The specified authentication login list is assigned to any user or to the non configured user for any component
• The login list is the default login list included with the default configuration and was not created using
‘authentication login’. The default login list cannot be deleted.
2.11.2 clear dot1x statistics
This command resets the 802.1x statistics for the specified port or for all ports.
2.11.3 clear radius statistics
This command is used to clear all RADIUS statistics.
2.11.4 dot1x default-login
This command assigns the authentication login list to use for non-configured users for 802.1x port security. This
setting is over-ridden by the authentication login list assigned to a specific user if the user is configured locally. If this
value is not configured, users will be authenticated using local authentication only.
Note: The default login list included with the default configuration can not be changed.
Format
authentication login <listname> [<method1> [<method2> [<method3>]]]
Mode Global Config
Format
no authentication login <listname>
Mode Global Config
Format
clear dot1x statistics {<slot/port> | all}
Mode Privileged EXEC
Format
clear radius statistics
Mode Privileged EXEC
Format
dot1x default-login <listname>
Mode Global Config