Kontron CP6923, Reference Manual, Page: 41 / 480

CP6923 Using the Command-Line Interface
Page 1 - 7 CP6923 CLI Reference Manual
1.8 Command Completion and Abbreviation
Command completion finishes spelling the command when you type enough letters of a command to uniquely
identify the command keyword. Once you have entered enough letters, press the SPACEBAR or TAB key to
complete the word.
Command abbreviation allows you to execute a command when you have entered there are enough letters to
uniquely identify the command. You must enter all of the required keywords and parameters before you enter the
command.
1.9 CLI Error Messages
If you enter a command and the system is unable to execute it, an error message appears. Table 7 describes the
most common CLI error messages.
Router OSPF
Config
From the Global Config mode, enter
router ospf
.
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-
Z
.
Router RIP
Config
From the Global Config mode, enter
router rip
.
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-
Z
.
MAC Access-list
Config
From the Global Config mode, enter
mac access-list extended <name> .
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter Ctrl-
Z
.
TACACS Config From the Global Config mode, enter
tacacs-server host <ip-addr>
,
where
<ip-addr>
is the IP address of the
TACACS server on your network.
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-
Z
.
DHCP Pool
Config
From the Global Config mode, enter
ip dhcp pool <pool-name>
.
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-
Z
.
ARP Access-List
Config Mode
From the Global Config mode, enter the
arp access-list command
.
To exit to the Global Config mode, enter the
exit
command. To return to the Privileged EXEC mode,
enter
Ctrl-Z
.
Table 7: CLI Error Messages
Message Text Description
% Invalid input detected at '^'
marker.
Indicates that you entered an incorrect or unavailable command.
The carat (^) shows where the invalid text is detected. This
message also appears if any of the parameters or values are not
recognized.
Command not found / Incomplete
command. Use ? to list commands.
Indicates that you did not enter the required keywords or values.
Ambiguous command Indicates that you did not enter enough letters to uniquely identify
the command.
Table 6: CLI Mode Access and Exit (Continued)
Command Mode Access Method Exit or Access Previous Mode