Kontron CP6923, Reference Manual, Page: 332 / 480

Utility Commands CP6923
CP6923 CLI Reference Manual Page 6 - 18
This command captures the current settings of OSPFv2 trapflag status:
• If all the flags are enabled, then the command displays
trapflags all
.
• If all the flags in a particular group are enabled, then the command displays
trapflags <group name>
all
.
• If some, but not all, of the flags in that group are enabled, the command displays
trapflags <groupname>
<flag-name>.
6.4.9 show sysinfo
This command displays switch information.
6.4.10 show tech-support
Use the
show tech-support
command to display system and configuration information when you contact
technical support. The output of the
show tech-support
command combines the output of the following
commands:
•
show version
•
show sysinfo
•
show port all
•
show logging
•
show event log
Note: If you use a text-based configuration file, the
show running-config
command will only display
configured physical interfaces, i.e. if any interface only contains the default configuration, that interface
will be skipped from the
show running-config
command output. This is true for any configuration
mode that contains nothing but default configuration. That is, the command to enter a particular config
mode, followed immediately by its ‘exit’ command, are both omitted from the
show running-config
command output (and hence from the startup-config file when the system configuration is saved.)
Format
show running-config [all | <scriptname>]
Mode Privileged EXEC
Format
show sysinfo
Mode Privileged EXEC
Term Definition
Switch Description Text used to identify this switch.
System Name Name used to identify the switch.The factory default is blank. To configure the system name,
see 7.8.1 “snmp-server“ on page 7 - 21.
System Location Text used to identify the location of the switch. The factory default is blank. To configure the
system location, see 7.8.1 “snmp-server“ on page 7 - 21.
System Contact Text used to identify a contact person for this switch. The factory default is blank. To configure
the system location, see 7.8.1 “snmp-server“ on page 7 - 21.
System ObjectID The base object ID for the switch’s enterprise MIB.
System Up Time The time in days, hours and minutes since the last switch reboot.
MIBs Supported A list of MIBs supported by this agent.