Kontron CP6923, Reference Manual, Page: 334 / 480

Utility Commands CP6923
CP6923 CLI Reference Manual Page 6 - 20
6.4.15 show boardinfo event-log
This command displays the event log of the board management controller. It can either display a summary (“info”)
or a list of all existing event-log records, a list with most recent records or a single record. The <record-id> (of SEL)
is displayed in the list of records.
6.4.16 show boardinfo update-status
This command displays the status of the firmware update process for the IPMI controller.
6.4.17 show boardinfo version
This command displays hardware and software revision information. This includes serial-numbers, software and
hardware revisions as applicable.
Version information included
• Board name
• Base board serial number and part number
• Basic product identification (product number)
• IPMC firmware version
• FWUM firmware version
• System U-boot version
• System kernel version
• FASTPATH version
• CPLD revision
• PCB revision
• Base board broadcom silicon revision
• Processor CPU type
• Processor clock
• Flash size
• Hardware write protection of non volatile memories
Note: The command “show boardinfo sensors<record-id> only works if the ”show boardinfo sensors
brief> command has been executed before.
Format
show boardinfo event-log {info | list [last <nr-of-most-recent-entries>
| <record-id>]}
Mode Priviledged EXEC
Note:
It might take a while to get an output of the “show boardinfo event-log list” command
Format
show boardinfo update-status
Mode Priviledged EXEC
Format show boardinfo version
Mode Priviledged EXEC^
User EXEC