Kontron CP6923, Reference Manual, Page: 403 / 480

CP6923 Management Commands
Page 7 - 17 CP6923 CLI Reference Manual
7.7.6.1 no users snmpv3 accessmode
This command sets the snmpv3 access privileges for the specified user as readwrite for the “admin” user and
readonly for all other users. The
<username>
value is the user name for which the specified access mode will
apply.
7.7.7 users snmpv3 authentication
This command specifies the authentication protocol to be used for the specified user. The valid authentication
protocols are
none
,
md5
or
sha
. If you specify
md5
or
sha
, the login password is also used as the snmpv3
authentication password and therefore must be at least eight characters in length. The
<username>
is the user
name associated with the authentication protocol. You must enter the
<username>
in the same case you used
when you added the user. To see the case of the
<username>
, enter the
show users
command.
7.7.7.1 no users snmpv3 authentication
This command sets the authentication protocol to be used for the specified user to none . The
<username>
is the
user name for which the specified authentication protocol is used.
7.7.8 users snmpv3 encryption
This command specifies the encryption protocol used for the specified user. The valid encryption protocols are
des
or
none.
If you select
des
, you can specify the required key on the command line. The encryption key must be 8 to 64
characters long. If you select the des protocol but do not provide a key, the user is prompted for the key. When you
use the
des
protocol, the login password is also used as the snmpv3 encryption password, so it must be a minimum
of eight characters. If you select
none
, you do not need to provide a key.
The
<username>
value is the login user name associated with the specified encryption. You must enter the
<username>
in the same case you used when you added the user. To see the case of the
<username>
, enter the
show users
command.
Format
no users snmpv3 accessmode <username>
Mode Global Config
Default no authentication
Format
users snmpv3 authentication <username> {none | md5 | sha}
Mode Global Config
Format
no users snmpv3 authentication <username>
Mode Global Config
Default no encryption
Format
users snmpv3 encryption <username> {none | des[key]}
Mode Global Config