Kontron CP6923, Reference Manual, Page: 64 / 480

Switching Commands CP6923
CP6923 CLI Reference Manual Page 2 - 20
2.2.29 show spanning-tree vlan
This command displays the association between a VLAN and a multiple spanning tree instance. The
<vlanid>
corresponds to an existing VLAN ID.
2.3 VLAN Commands
This section describes the commands you use to configure VLAN settings.
2.3.1 vlan database
This command gives you access to the VLAN Config mode, which allows you to configure VLAN characteristics.
2.3.2 network mgmt_vlan
This command configures the Management VLAN ID.
Mode • Privileged EXEC
• User EXEC
Term Definition
Spanning Tree
Adminmode
Enabled or disabled.
Spanning Tree
Version
Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or IEEE 802.1d) based
upon the Force Protocol Version parameter.
BPDU Guard Mode Enabled or disabled.
BPDU Filter Mode Enabled or disabled.
Configuration
Name
Identifier used to identify the configuration currently being used.
Configuration
Revision Level
Identifier used to identify the configuration currently being used.
Configuration
Digest Key
Identifier used to identify the configuration currently being used.
MST Instances List of all multiple spanning tree instances configured on the switch.
Format
show spanning-tree vlan <vlanid>
Mode • Privileged EXEC
• User EXEC
Term Definition
VLAN Identifier The VLANs associated with the selected MST instance.
Associated
Instance
Identifier for the associated multiple spanning tree instance or “CST” if associated with the
common and internal spanning tree.
Format
vlan database
Mode Privileged EXEC
Default 1
Format
network mgmt_vlan <1-4094>