Kontron CP6923, Reference Manual, Page: 227 / 480

CP6923 Routing Commands
Page 4 - 15 CP6923 CLI Reference Manual
Inter Area Routes...........................0
External Type-1 Routes......................0
External Type-2 Routes......................0
Reject Routes.................................2
Total routes..................................8
4.2.14 show ip route preferences
This command displays detailed information about the route preferences. Route preferences are used in
determining the best route. Lower router preference values are preferred over higher router preference values. A
route with a preference of 255 cannot be used to forward traffic.
4.2.15 show ip stats
This command displays IP statistical information. Refer to RFC 1213 for more information about the fields that are
displayed.
4.3 Router Discovery Protocol Commands
This section describes the commands you use to view and configure Router Discovery Protocol settings on the
switch. The Router Discovery Protocol enables a host to discover the IP address of routers on the subnet.
4.3.1 ip irdp
This command enables Router Discovery on an interface.
Format
show ip route preferences
Modes • Privileged EXEC
• User EXEC
Term Definition
Local The local route preference value.
Static The static route preference value.
OSPF Intra The OSPF Intra route preference value.
OSPF Inter The OSPF Inter route preference value.
OSPF External The OSPF External route preference value.
RIP The RIP route preference value.
BGP4 The BGP-4 route preference value.
Format
show ip stats
Modes • Privileged EXEC
• User EXEC
Default disabled
Format
ip irdp
Mode Interface Config