Kontron CP6923, Reference Manual, Page: 385 / 480

CP6923 Utility Commands
Page 6 - 71 CP6923 CLI Reference Manual
6.13.4 show sflow agent
The sFlow agent collects time-based sampling of network interface statistics and flow-based samples. These are
sent to the configured sFlow receivers. Use this command to display the sFlow agent information.
Example: The following shows example CLI display output for the command.
(switch) #show sflow agent
sFlow Version.................................. 1.3;Broadcom Corp;1.0
IP Address..................................... 10.131.12.66
6.13.5 show sflow pollers
Use this command to display the sFlow polling instances created on the switch. Use “-” for range.
6.13.6 show sflow receivers
Use this command to display configuration information related to the sFlow receivers.
Format
no sflow poller {<rcvr-indx> | interval <poll-interval>}
Mode Interface Config
Format
show sflow agent
Mode Privileged EXEC
Field Description
sFlow Version Uniquely identifies the version and implementation of this MIB. The version string must have
the following structure: MIB Version; Organization; Software Revision where:
• MIB Version: ‘1.3’, the version of this MIB.
• Organization: Broadcom Corp.
• Revision: 1.0
IP Address The IP address associated with this agent.
Format
show sflow pollers
Mode Privileged EXEC
Field Description
Poller Data Source The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical ports
only.
Receiver Index The sFlowReceiver associated with this sFlow counter poller.
Poller Interval The number of seconds between successive samples of the counters associated with this
data source.
Format
show sflow receivers [<index>]
Mode Privileged EXEC