Kontron CP6923, Reference Manual, Page: 251 / 480

CP6923 Routing Commands
Page 4 - 39 CP6923 CLI Reference Manual
4.8.31 default-information originate (OSPF)
This command is used to control the advertisement of default routes.
4.8.31.1 no default-information originate (OSPF)
This command is used to control the advertisement of default routes.
4.8.32 default-metric (OSPF)
This command is used to set a default for the metric of distributed routes.
4.8.32.1 no default-metric (OSPF)
This command is used to set a default for the metric of distributed routes.
4.8.33 distance ospf (OSPF)
This command sets the route preference value of OSPF in the router. Lower route preference values are preferred
when determining the best route. The type of OSPF route can be
intra, inter
, or
external
. All the external
type routes are given the same preference value. The range of
< preference >
value is 1 to 255.
4.8.33.1 no distance ospf
This command sets the default route preference value of OSPF routes in the router. The type of OSPF can be intra,
inter, or external. All the external type routes are given the same preference value.
Default • metric—unspecified
• type—2
Format
default-information originate [always] [metric <0-16777214>] [metric-
type {1 | 2}]
Mode Router OSPF Config
Format
no default-information originate [metric] [metric-type]
Mode Router OSPF Config
Format
default-metric <1-16777214>
Mode Router OSPF Config
Format
no default-metric
Mode Router OSPF Config
Default 110
Format
distance ospf {intra-area <1-255> | inter-area <1-255> | external <1-
255>}
Mode Router OSPF Config
Format
no distance ospf {intra-area | inter-area | external}
Mode Router OSPF Config