Kontron CP6923, Reference Manual, Page: 247 / 480

CP6923 Routing Commands
Page 4 - 35 CP6923 CLI Reference Manual
4.8.17.1 no area virtual-link authentication
This command configures the default authentication type for the OSPF virtual interface identified by
<areaid>
and
<neighbor>
. The
<neighbor>
parameter is the Router ID of the neighbor.
4.8.18 area virtual-link dead-interval (OSPF)
This command configures the dead interval for the OSPF virtual interface on the virtual interface identified by
<areaid>
and
<neighbor>.
The
<neighbor>
parameter is the Router ID of the neighbor. The range for seconds
is 1 to 65535.
4.8.18.1 no area virtual-link dead-interval
This command configures the default dead interval for the OSPF virtual interface on the virtual interface identified
by
<areaid>
and
<neighbor>
. The
<neighbor>
parameter is the Router ID of the neighbor.
4.8.19 area virtual-link hello-interval (OSPF)
This command configures the hello interval for the OSPF virtual interface on the virtual interface identified by
<areaid>
and
<neighbor>
. The
<neighbor>
parameter is the Router ID of the neighbor. The range for
<seconds>
is 1 to 65535.
4.8.19.1 no area virtual-link hello-interval
This command configures the default hello interval for the OSPF virtual interface on the virtual interface identified
by
< areaid >
and
< neighbor >
. The
< neighbor >
parameter is the Router ID of the neighbor.
Format
no area <areaid> virtual-link <neighbor> authentication
Mode Router OSPF Config
Default 40
Format
area <areaid> virtual-link <neighbor> dead-interval <seconds>
Mode Router OSPF Config
Format
no area <areaid> virtual-link <neighbor> dead-interval
Mode Router OSPF Config
Default 10
Format
area <areaid> virtual-link < neighbor > hello-interval < 1-65535 >
Mode Router OSPF Config
Format
no area <areaid> virtual-link < neighbor > hello-interval
Mode Router OSPF Config