Kontron CP6923, Reference Manual, Page: 233 / 480

CP6923 Routing Commands
Page 4 - 21 CP6923 CLI Reference Manual
4.5.2 ip vrrp (Interface Config)
Use this command in Interface Config mode to create a virtual router associated with the interface. The parameter
<vrid>
is the virtual router ID, which has an integer value range from 1 to 255.
4.5.2.1 no ip vrrp
Use this command in Interface Config mode to delete the virtual router associated with the interface. The virtual
Router ID,
<vrid>
, is an integer value that ranges from 1 to 255.
4.5.3 ip vrrp mode
This command enables the virtual router configured on the specified interface. Enabling the status field starts a
virtual router. The parameter
<vrid>
is the virtual router ID which has an integer value ranging from 1 to 255.
4.5.3.1 no ip vrrp mode
This command disables the virtual router configured on the specified interface. Disabling the status field stops a
virtual router.
4.5.4 ip vrrp ip
This command sets the virtual router IP address value for an interface. The value for
<ipaddr>
is the IP address
which is to be configured on that interface for VRRP. The parameter
<vrid>
is the virtual router ID which has an
integer value range from 1 to 255. You can use the optional
[secondary]
parameter to designate the IP address
as a secondary IP address.
4.5.4.1 no ip vrrp ip
Use this command in Interface Config mode to delete a secondary IP address value from the interface. To delete
the primary IP address, you must delete the virtual router on the interface.
Format
ip vrrp <vrid>
Mode Interface Config
Format
no ip vrrp <vrid>
Mode Interface Config
Default disabled
Format
ip vrrp <vrid> mode
Mode Interface Config
Format
no ip vrrp <vrid> mode
Mode Interface Config
Default none
Format
ip vrrp <vrid> ip <ipaddr> [secondary]
Mode Interface Config
Format
no ip vrrp <vrid> <ipaddress> secondary