Kontron CP6923, Reference Manual, Page: 354 / 480

Utility Commands CP6923
CP6923 CLI Reference Manual Page 6 - 40
6.8.2 client-identifier
This command specifies the unique identifier for a DHCP client. Unique-identifier is a valid notation in hexadecimal
format. In some systems, such as Microsoft DHCP clients, the client identifier is required instead of hardware
addresses. The unique-identifier is a concatenation of the media type and the MAC address. For example, the
Microsoft client identifier for Ethernet address c819.2488.f177 is 01c8.1924.88f1.77 where 01 represents the
Ethernet media type. For more information, refer to the “Address Resolution Protocol Parameters” section of RFC
1700, Assigned Numbers for a list of media type codes.
6.8.2.1 no client-identifier
This command deletes the client identifier.
6.8.3 client-name
This command specifies the name for a DHCP client. Name is a string consisting of standard ASCII characters.
6.8.3.1 no client-name
This command removes the client name.
6.8.4 default-router
This command specifies the default router list for a DHCP client. {
address1, address2… address8
} are valid
IP addresses, each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Mode Global Config
Default none
Format
client-identifier <uniqueidentifier>
Mode DHCP Pool Config
Format
no client-identifier
Mode DHCP Pool Config
Default none
Format
client-name <name>
Mode DHCP Pool Config
Format
no client-name
Mode DHCP Pool Config
Default none
Format
default-router <address1> [<address2>....<address8>]
Mode DHCP Pool Config