Intel MFSYS25V2 Service Manual Download Page 136

Page: 136 / 226

120

Intel

Modular Server System Service Guide

Storage Layout

The Storage Layout report shows a graphical or tabular representation of all the

components in the storage subsystem. This report shows you:

•

Physical drives and drive groups (physical drives assigned to a storage pool)

•

Storage pools with the assigned hot-spare drives

•

Virtual drives showing the drive name, storage capacity, and RAID level

•

The drive mappings to the servers showing the drive numbers for each drive on the

server

•

The storage control module affinity for each virtual drive.

To access the Storage Layout report, click Reports > Storage Layout in the left navigation

panel.

You can switch between the graphical and table views by clicking on the link at the top of

the report.

Note:

The Physical drives and Server columns represent the physical slots for hard drives and

servers. If a drive is not present, it will be marked as not present.

The Storage Layout graphics in

Figure 71

and

Figure 72

illustrate both the graphical and

tabular views for the following storage configuration:

•

Fourteen physical drives present in the system.

•

Drives 1, 2, and 3 are grouped together in a single storage pool named “Storage Pool

1”.

•

Drive 14 is a global hot spare.

•

Drives 4 - 13 are available/unused.

•

One storage pool is present. The storage pool is named “Storage Pool 1” and is 100.58

GB in size.

•

Two virtual drives are present. One virtual drive is named “Finance” and is configured

as a 25-GB RAID 0 drive. The second virtual drive is named “Marketing” and is

configured as a 30-GB RAID 0 drive.

•

The virtual drive “Finance” is assigned to Server 1 as Drive 0. The virtual drive

“Marketing” is assigned to Server 2 as Drive 0.

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands

Intel MFSYS25V2, Service Manual

Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands