manualshive.com logo in svg

Intel MFSYS25V2, Service Manual, Page: 108 / 226

Share
Download
Intel MFSYS25V2 Service Manual Download Page 108

92

Intel

® 

 Modular Server System Service Guide

The steps to create a virtual drive are as follows:

1. Select the existing storage pool, which will contain the virtual drive.
2. Select 

Create Virtual Drive

 from the storage pool action menu. 

The following dialog box is displayed.

Figure 59.  Create Virtual Drive Dialog Box

3. Enter a name for the virtual drive.  
4. Select the RAID level for the virtual drive from the drop-down box.  

The options available in the drop-down box are determined by the number of drives in 

the selected storage pool.  

5. Enter the size for the virtual drive. 

Depending on the RAID level selected, the maximum size displayed may change (i.e., 

if mirroring is selected).  

6. Select the Initialize Boot Sector check box if an operating system will be installed on 

this virtual drive. 
This will ensure a fresh volume for partitioning.

7. In the Controller Affinity list, select the preferred storage control module to handle 

requests for the virtual drive. 
By default, this option is set to “auto (recommended)” but can be changed to either 

Intel

® 

Storage Control Module 1 (SCM1) or Intel

® 

Storage Control Module 2 

(SCM2). By selecting “auto (recommended)”, the system assigns a storage control 

module for the virtual drive.

8. Assign or map the virtual drive to a server. 

A virtual drive can be assigned to any of the six server slots. A server does not have to 

be present in the Intel

® 

Modular Server System MFSYS25/MFSYS35 for selection. 

Summary of Contents for MFSYS25V2



































































































































































































































Reviews:

No comments