Intel MFSYS25V2 Service Manual Download Page 162

Page: 162 / 226

146

Intel

Modular Server System Service Guide

— Exporting and importing chassis settings including the storage and switch

configuration

Steps to activate a feature

1. Obtain a feature activation code or key. Contact your Intel Sales representative for

information on how to obtain a key.

2. Click Settings > Feature Activation in the left navigation panel.
3. Enter your activation code.
4. Click Add.

Figure 96. Settings - Feature Activation

Firmware Updates

The Intel

Modular Server Control UI provides a simple interface to update the system

firmware from a single compressed update package released by Intel called an UFU

(Unified Firmware Update). In addition to providing an easy-to-use interface to update the

firmware for the entire system, this screen will display all currently installed component

firmware versions, as well as current status. This will enable the IT administrator to

quickly view the installed versions and determine if an update is required.

The Unified Firmware Update supports firmware updates for the management module,

storage control modules, switch modules, fans, server BIOS, and firmware.

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Intel MFSYS25V2, Service Manual, Page: 162 / 226

Search results

Summary of Contents for MFSYS25V2

Reviews: