Intel MFSYS25V2 Service Manual Download Page 134

Page: 134 / 226

118

Intel

Modular Server System Service Guide

Table 29. Management Module Tabs

Intel

Management Module Help

To quickly access additional help regarding the Intel

Management Module screen,

actions, and tabs, click on the Get Help button in the Management Module help box

located under the actions box.

Intel

Modular Server Fans and Power Supplies

Fans and power supplies are available for selection and viewing from the system graphic.

The system has three fan modules:

•

One I/O cooling module (front panel)

•

Two server cooling modules (rear panel)

•

Each power supply also has integrated cooling fans.

The system can have up to four power supplies that are accessed from the rear panel. Each

power supply also has integrated cooling fans. If a power supply is not installed, a fan

blank panel must be installed in the power supply slot to ensure proper cooling.

To view current status, available actions, and product details for all installed fans and

power supplies, select the specific component from the system graphic. Once selected, the

main screen graphic will change to display the selected fan or power supply highlighted in

green. The help box and informational tabs will update to provide all available

information for the selected fan or power supply. Current health and product summary is

quickly available by moving the mouse over the Health/Information icon located on the

selected component.

Note:

No actions are available for fans or power supplies.

Health Icons

The health icons are displayed on the graphical representation of the component when the

component is selected.

Tab Heading

Description

General

The General tab displays:

•

Current status of the selected management module

•

Product data information, including manufacturer, firmware revision,
serial number, product ID, etc.

Events

Displays all events for the selected Intel

Management Module.

Midplane

Displays product data information for the midplane, including
manufacturer, firmware revision, serial number, part number, etc.

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands

Intel MFSYS25V2, Service Manual

Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands